DIY Office Focal Wall

With a few coats of paint and a lot of stripes, Kayla from, @homediyary, created a mural focal wall in her office.

Check out her step-by-step project below!

1

Create Grid

Measure the length of your wall and determine how many equal columns you need to create.
2

Level or laser

Create straight vertical lines. I made my columns 7 in. wide.
3

Tape off the Stripes

Use FrogTape^® Multi-Surface Painter's Tape to tape every other column.
4

Paint the Base

Apply your base color in the section.
5

Add the Rows

Wait 24 hours and begin applying your horizontal rows.
Consejo profesional: I used the tape as a spacer and also used FrogTape^® Delicate Surface Painter's Tape on the freshly painter surface.
6

Seal the Tape

Run your finger along the edges and then wait for the paint to set.
7

Retire la cinta

Remove the FrogTape^® to reveal the design.

Create Grid

Measure the length of your wall and determine how many equal columns you need to create.

Create straight vertical lines. I made my columns 7 in. wide.

Apply your base color in the section.

Wait 24 hours and begin applying your horizontal rows.

Consejo profesional: I used the tape as a spacer and also used FrogTape^® Delicate Surface Painter's Tape on the freshly painter surface.

Run your finger along the edges and then wait for the paint to set.

Remove the FrogTape^® to reveal the design.